The paddles need to be inspected for deformation, wear, breakage and corrosion, and for loose paddle screws before flight. If these conditions exist, the blade and screws need to be replaced.

1. Make sure the aircraft is turned off.

2. Pair the propeller with the dot mark with the arm with the dot, and the propeller without the dot mark is paired with to the arm without the dot.

3. Align the propeller round holes with the motor screw holes and lock the screws tightly.

Yes, when using one key to return, please set the return altitude and always observe the surrounding environment to avoid collision during the return.

Yes, the front, back and bottom of the aircraft are equipped with binocular vision perception system, so it can do three-way obstacle avoidance.

800meters (2,624ft.), different countries or regions have different altitude restrictions. Please pay attention to local regulations when flying.

4000meters (13,123ft.)

The EVO Nano series are all set with three flying modes: smooth mode, standard mode, and ludicrous mode. The maximum flight speed in smooth mode is 5m/s; the maximum flight speed in standard mode is 10m/s; the speed in ludicrous mode can reach 15m/s. Users can switch in the App according to their proficiency in flight control and the actual flight environment.

The maximum wind resistance is level 5 (8.5~10.5m/s; 19~24mph).

No.

The aircraft has no storage, but there is an SD card slot, which supports up to 256G storage expansion.

You need to connect your mobile phone to the remote controller, then pair with the aircraft through the Autel Sky app, and follow the instructions of the Autel Sky app to complete the activation.

The only difference between the two products is the camera, and the rest of the performance is the same.

The weight of the aircraft is ≤249g, the weight may vary depending on the production batch, please refer to the actual. EVO Nano series is exempt from registration in some countries or regions, please check the relevant local laws and regulations.

4 kinds, namely Autel Orange, Arctic White, Blazing Red and Deep Space Gray.

1. Turn on the aircraft power supply and place the aircraft on the ground.

2. Connect mobile phone to the remote controller, operate Autel Sky App, and pair aircraft and the remote controller.

3. After pairing, open the album, select the required materials and then click the download icon to realize high-speed download.

Notes:

- Please use the fast transfer function in an interference-free and unobstructed environment, away from routers, Bluetooth headphones and other sources of interference.

- In countries and regions where 5.8GHz band is allowed by law, the maximum download rate can be achieved in an interference-free and unobstructed environment. If the local 5.8GHz band is not allowed, the download rate will be limited when using 2.4GHz band for transmission.

The remote controller antenna is built into the phone holder, please adjust the angle of the antenna according to the position of the drone, i.e. let the top plane of the phone holder face the aircraft, and make sure there is no obstruction between the remote controller and the aircraft.

Autel SkyLink supports 2.4 GHz/5.8 GHz/5.2GHz tri-band. Select dual band mode in Autel Sky app, and the connection band between the aircraft and the remote controller will automatically switch between 2.4 GHz and 5.8 GHz/5.2GHz according to the interference situation. Autel SkyLink's anti-interference performance and image transmission stability is also stronger.

The quality of real-time image transmission is affected by the surrounding environment, and the resolution can reach 2.7K/30FPS when the image transmission distance is less than 1km (0.62miles).

In an open area that is unobstructed and free of interference, the FCC standard is 10km (6.2miles).

A customizable function button is set in the upper left corner of the remote controller, which can be customized by Autel Sky app to set the following functions.

When you click/double click the custom button: obstacle avoidance on/off; AE lock/unlock; gimbal back to center/down; map/FPV switch.

The Type-C port on the bottom is for charging the remote controller, and the Type-C port on the top is for connecting mobile devices.

No.

Yes.

Supports surround time-lapse and free time-lapse.

Support horizontal / vertical / wide angle shot / spherical shot.

Support for automatic follow-up of selected targets is available through the Autel Sky app.

Support and selectable close-up/medium/telephoto shots.

Support 4 kinds of one-click short film mode, respectively: FLICK, ROCKET, FADE AWAY and ORBIT.

Supports software cropping to obtain vertical screen images.

Single shot, continuous shot, AEB, timer, HDR.

Yes.

Supports 1 - 16x digital zoom.

Photo：JPG/DNG

Video：MOV/MP4

EVO Nano

Photo: 8000x6000 (4:3); 4000x3000 (4:3); 3840x2160 (16:9)

Video: 3840x2160 p30/25/24; 2720*1528 p30/25/24; 1920x1080 p60/p50/p48/p30/p25/p24

EVO Nano+

Photo: 8192x6144 (4:3); 4096*3072 (4:3); 3840*2160 (16:9)

Video: 3840x2160 p30/25/24; 2720*1528 p30/25/24; 1920x1080 p60/p50/p48/p30/p25/p24

The EVO Nano has a 1/2-inch CMOS sensor with 48 effective megapixels; the EVO Nano+ has a 1/1.28-inch CMOS sensor with 50 effective megapixels.

Three-axis mechanical stabilizer gimbal (pitch, yaw, roll)

No.

The capacity of the battery is 17.32Wh and can be carried on board airplanes according to airline regulations.

When the battery is used in a low-temperature environment, note that the battery life will be reduced. To optimize performance in the cold, it is recommended to warm the battery up to 15 °C before use.

1. do not expose the battery to temperatures below -10°C or above 40°C, which will shorten the battery life and may result in fire, explosion or other permanent damage.

2. Do not charge the battery immediately after a flight, it is recommended to wait until the battery has cooled down to room temperature before charging.

3. the ideal ambient temperature for charging the battery is 10 °C~30 °C;

4. the ideal storage temperature for the battery is 22 °C~28 °C. The battery should be stored in a waterproof and moisture-proof environment, and protected from sunlight.

5. Recharge and discharge the battery every 3 months to keep it active.

Each battery takes approximately 90 minutes to fully charge.

You can use the Type-C charging cable to charge directly to the aircraft charging port and adapter, or you can use Multi-charger to charge the battery.

About 28 minutes (windless environment).

Yes.

a.If you turn off the device during the upgrade process, it will cause the upgrade to fail.

b.If you disconnect during the firmware package download process, the upgrade will fail.

c.Make sure the remaining power of the battery and remote control is ≥ 30% before upgrading.

Method : Download the firmware upgrade package from Autel Sky app

1. Open the remote controller and the aircraft, connect your phone to the remote controller and run the Autel Sky app.

2. When the system detects a new firmware version, Autel Sky app will automatically pop up a prompt box after connecting to the aircraft to remind you to download and install.

3. Please follow the instructions on the Autel Sky app to update the firmware, users can check the upgrade process through the app interface.

4. Please restart the flight device and remote controller after the upgrade is completed.

iOS 12.0 and above

Android 8.0 and above

When the system detects a new App version, the App will automatically pop up a prompt after connecting to the flight, and users can follow the prompt to upgrade the App.