The EVO II Enterprise is equipped with a six-direction binocular vision obstacle avoidance system. The body has a total of ten vision sensors (two of each on the front, back, top, bottom, left and right).

No, the EVO II Enterprise is not waterproof. Please do not fly on rainy days.

Low-noise propellers.

Up to 42 minutes  in ideal conditions (excluding industry accessories).

The series includes the EVO II Pro Enterprise Edition and EVO II Dual 640T Enterprise Edition. The former is equipped with a 6K visible light camera, and the latter is equipped with a dual-light thermal imaging camera.

Compared with other products in the EVO II series, the EVO II Enterprise adds industry expansion accessories (searchlights, megaphones, night lights, RTK modules). EVO II Enterprise aircraft also have larger propellers and carbon fiber arms.

The built-in storage capacity is 128 GB. The controller does not support external SD card expansion storage.

Yes, HDMI output is supported.

3 hours (maximum brightness)

4.5 hours (50% brightness)

About 2 hours.

Align the antenna's flat wide surface with the aircraft.

902-928 MHz; 2.400-2.4835 GHz; 5.725‒5.850 GHz.

*The working frequency band varies according to different countries and models. 

In an open, non-interference environment, the FCC standard maximum distance is 13 km (8 miles) and the CE standard maximum distance is 7 km (4.34 miles).

The EVO II Enterprise comes standard with the Autel Smart Controller. The controller is equipped with a 7.9-inch retina touch screen that uses original color display technology. It has a resolution of 2048x1536 and a maximum brightness of 2000nit, which is 4 times that of ordinary mobile devices. The controller is also compatible with other types of drones in the EVO II series.

To remove accessories:

1) Confirm that the power of the aircraft is turned off.

2) Loosen the screws on both sides of the accessory and remove the accessory.

3) Insert both ends of the protective cover into the corresponding slots.

To mount accessories:

1) Confirm that the power of the aircraft is turned off.

2) Twist gently to remove the protective cover of the expansion accessory interface.

3) Align the screws on both sides of the accessory with the screw holes, and tighten the screws.

1 cm + 1 ppm (horizontal), 1.5 cm + 1 ppm (vertical)

Depending on the actual environment, the distance can be up to 16,500 feet.

The light has a visible range of about 100 feet.

Users can pre-record multiple voice messages through the Autel Explorer app, and then select the voice message to be played.

After testing, in an environment of 65db, the sound intensity of the drone at different distances from the test point is: 120dB at 1 meter (3.3 feet) ; 88dB at 60 meters (197 feet); and 70dB at 110 meters (360 feet).

There is a searchlight icon in the lower left corner of the Autel Explorer app camera view. Click the icon to turn off/on the searchlight or select the light intensity.

1. The influence of the atmosphere: The higher the temperature and humidity of the atmosphere, the greater the temperature measurement error.

2. The distance between the camera and the measured object: The farther the distance, the greater the temperature measurement error.

3. The emissivity and background temperature of the object: When the emissivity of the surface of the measured object is low and the background temperature is high, it will cause a large temperature measurement error.

Yes. We also provides a temperature analysis tool called the IR PC TOOL.

EVO II Pro Enterprise Edition visible light camera — Photo format: JPG/DNG, Video format: MOV/MP4;

EVO II Dual 640T Enterprise Edition of visible light camera — Photo format: JPG/DNG, video format: MOV/MP4;

EVO II Dual 640T Enterprise Edition infrared camera — Photo format: JPG/TIFF, video format: MOV/MP4.

Yes. The EVO II Pro Enterprise Edition can achieve 3x lossless zoom; the EVO II Dual 640T Enterprise Edition can achieve 4x lossless zoom.

The EVO II Pro Enterprise Edition is equipped with a 1-inch 20-million pixel CMOS sensor. The EVO II Dual 640T Enterprise Edition is equipped with a 640x512 thermal imaging sensor and 1/2-inch 48-million pixel CMOS sensor.

Yes. 

The energy of the battery is 82Wh. According to the requirements of the airline, the battery can be carried on board. Check with your local aviation authority and airline prior to traveling.

When used in a low temperature environment, the battery life will be reduced. Please plan flight time accordingly. For the best performance of the battery, it is recommended to keep the internal battery temperature above 15°C (59° F) before flying.

The battery should be stored in a dry, ventilated and cool environment, away from fire, high temperature and flammable materials. Do not place the battery in an environment that may increase the temperature of the battery, such as in direct sunlight or inside a hot car. During long-term storage, ensure that the power is more than two LED light indicators. If stored for more than three months, charge and discharge the battery at least once to keep it active.

It takes about 90 minutes to fully charge each battery.

Same as the battery of EVO II series products: 7100mAh, 11.55V, 82Wh, can be used interchangeably

Currently, only the Autel Explorer app is supported.

Method 1 (Manual Firmware Update):

1. Place the microSD card inserted into your EVO II Enterprise unit into your Mac or PC and download the latest firmware file from our official website.

2. Paste the firmware file onto your microSD card and then insert the microSD card back into your EVO II Enterprise unit.

3. Power on the Smart Controller, then aircraft. You can now follow the update progress via the screen on your Smart Controller.

4. Once the update is complete, reboot your Smart Controller and aircraft.

Method 2 (OTA, Over-the-Air Firmware Update):

1.Ensure your Smart Controller is connected to a mobile hotspot or WiFi network.

2. When the Smart Controller is connected to a network, if the firmware needs to be upgraded, it will automatically detect the new firmware and prompt you to download. 

3. After completing the download as prompted, click "Upgrade" and wait for the operation page to say "Firmware Upgrade Complete".

4. Once the update is complete, reboot your Smart Controller and aircraft.

It can be used for many fields, such as law enforcement, electrical power inspection, fire rescue, building inspection, and more. Professionals in these fields use the drone to meet daily data collection needs and complete operation tasks stably and efficiently.